TCS41CK
Attention:
Make sure that each bolt needed for all steps
matches the corresponding figure to ensure proper
assembly.
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the legs (#2) to the underside of the table
top (#1) rim by using bolts (#5) and washers (#7).
Keep the bolts loose. See Figure 1.
PARTS LIST
1
1
6
4
4
8
12
4
1
TCS41CK-CS01
TCS42CK-CS02
62TCS42CKY101
13C??1B29008001
17C01A0706001Y4
17C33A0709001Y4
17FA05040301-Y4
18000337004
17KAA0101----Y4
TABLE TOP
LEG
CENTER
CONNECTOR
TILE
BOLT M6*16
HEX.KEY WRENCH 4MM
BOLT CAP
WASHER d6.5*D13*1.0
BOLT M6*25
FIGURE 1
PART
NO.
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
1
2
3
4
5
6
7
8
9
10
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Note:
The tiles can break easily. Therefore, be careful
when removing them. Do not throw away the residual
tiles. Keep them for future use.
5
7
8
2
2
2
2
1
PAGE 1 OF 2
STOP
DON’T RETURN TO STORE!
BOLT CAP M6
8
18000337001
#5 BOLT M6*25
25
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
