TCS26SH
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the legs (#2) to the underside of the table top
(#1) rim by using bolts (#5) . Keep the
bolts loose. See Figure 1.
PARTS LIST
1
1
4
4
12
1
1
TCS27SH-CS05-1
TCS27SH-CS04-1
62TCS27HVY101
13C??1B29008001
17C40A0705001YX
17KAC3101----Y3
17KAA0101----Y4
TABLE TOP
LEG
CENTER
CONNECTOR
TILE
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 10MM
BOLT M6*15
FIGURE 1
PART
NO.
MATERIAL CODE
PART
Q’TY
1
2
3
4
5
6
7
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Note:
The tiles are easy to be broken, be careful when you
remove them. Do not throw the residual tiles away,
retain them for future use.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
5
2
2
2
2
1
COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
PAGE 1 OF 2
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
#5 BOLT M6*15
15
