PART
NO.
PARTS LIST
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
1
2
3
4
5
6
7
1
8
1
1
1
1
1
8
9
10
11
12
13
2
1
1
8
KTS6652-CS03-1
KTS6652-CS01-1
KTS6655-CS02-1
KTS6652-CS04-3
KTS6652-CS04-4
17C40A0705001YX
17C40A0745091YX
1
61K6655Y00001BA
1
61K6655Y50001BA
14
1
61K6655J00001BA
61K6655X00001BA
17KAC3101----Y3
BACK
ASSEMBLY
LEFT/RIGHT ARM
SEAT ASSEMBLY
RIGHT LEG
LEFT LEG
BOLT M6*15
BOLT M6*100
LEFT SEAT CUSHION
RIGHT SEAT CUSHION
PILLOW
HEX. KEY WRENCH 10MM
BACK CUSHION
17KAA0101----Y4
17C40A0716001YX
HEX. KEY WRENCH 4MM
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
FIGURE 1
Step 1:
Place the seat assembly (#3) onto a non-abrasive
surface, such as a carpet. Fasten the legs (#4 and #5)
to the seat assembly (#3) by using bolts (#6). Keep the
bolts loose. See Figure 1.
#6 BOLT M6*15
5
R
Note:
To ensure proper assembly, the label marked “A”
on the seat assembly (#3) should coincide with
the label marked “A” on the legs (#4 and #5).
Note:
The labels marked “L” and “R” on the legs (#4 and #5)
should coincide with Figure 1 to ensure proper
assembly.
6
6
4
L
A
A
A
3
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
STS40JD
KTS6655
PAGE 1 OF 7
E-2
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
COURTYARD CREATIONS INC.
BOLT M6*45
15