1
PART
NO.
PART
NO.
PARTS LIST
RUS0188-
WM
Attention:
Make sure that each bolt needed for all steps match the
corresponding figure to ensure proper assembly.
STEP 1:
Insert the right and left arms (#1 and #2) into the cross braces (#3)
on both sides. Fasten them together by using bolts (#6), washers
(#9), and plastic nuts (#10). Keep the bolts loose. See Figure 1.
NOTE:
1. The labels marked “L” and “R” on the arms (#1 and #2) should
coincide with Figure 1 to ensure proper assembly.
2. The arrows mark on the right and left arms (#1 and #2) must
coincide with Figure 1 to ensure proper assembly.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2
COURTYARD CREATIONS INC.
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
STOP
DON’T RETURN TO STORE!
MATERIAL CODE
MATERIAL CODE
PART
PART
Q’TY
Q’TY
2
3
4
5
6
7
1
1
9
8
4
2
1
1
#6 BOLT M6*30
Arm
assembly
FIGURE 1
L
R
RUS0188-CS01
RUS0188-CS02
62RUS023DH101
RUS0175-CS02
RUS0188-CS03
17C01A0710002Y4
17C01A0719072Y4
17C01A0726011Y4
17FA05040301-Y4
1800C23001
1800337002
61R0188C00001BA
17KAA0201----Y4
17KAB1101----Y4
RIGHT ARM
LEFT ARM
CROSS BRACE
BOTTOM FRAME
SEAT ASSEMBLY
BOLT M6*30
BOLT M6*80
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
CUSHION
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
BOLT M6*55
32
12
16
2
1
1
4
4
14
13
12
11
10
