ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
RTS009P
PAGE 1 OF 2
V-3
COURTYARD CREATIONS INC.
PARTS LIST
PART
NO.
MATERIAL
CODE
Q’TY
PART
1
2
3
4
7
6
5
SEAT ASSEMBLY
LEFT ARM
RIGHT ARM
BOLT M6*35
BACK CUSHION
SEAT CUSHION
1
1
1
6
1
1
RTS009P-CS11-1
RTS009P-CS01-2
RTS009P-CS01-3
17C40A0712001YX
HEX. KEY WRENCH 4MM
1
17KAA0101----Y4
61R009PX00001BA
61R009PY00001BA
FIGURE 1
Step 1:
Place the left arm (#2) onto a non-abrasive surface, such
as a carpet, with its holes facing upwards. At the front
of the chair, fasten the seat assembly (#1) to arms
(#2 and #3) by using bolts (#4). Keep the bolts loose.
See Figure 1.
Note:
The labels marked “L” and “R” on arms (#2 and #3)
should coincide with Figure 1 to ensure proper
assembly.
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
!
!
!
!
!
2
L
3
4
1
R
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP
DO NOT RETURN TO THE STORE!
