Attention:
Make sure that all bolts needed for each step matches
the corresponding figure to ensure proper assembly.
Step 1:
Insert the rear seat (#1) into the legs (#2). Fasten the
legs (#2) to the rear seat (#1) by using bolts (#5) and
steel washers (#7). See Figure 1.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
FIGURE 1
2
1
5
7
KUS128U
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
1
1
4
2
4
2
2
1
1
1
1
KUS128U-CS02-5
KUS128U-CS01-1
KUS128U-CS02-4
KUS128U-CS03-1
17C02A0712003YX
17C40A0716001YX
17XA3309
17FA05040301-YX
18000C23001
17KAA0201----Y4
17KAB1101----Y4
61K128UX00001BA
61K128UY00001BA
REAR SEAT
FRONT SEAT
BACK ASSEMBLY
BOLT M6*35
BOLT M6*45
STEEL WASHER
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
HEX. KEY WRENCH 6MM
NUT WRENCH 10 & 13MM
BACK CUSHION
SEAT CUSHION
PAGE 1 OF 2
COURTYARD CREATIONS INC.
1
17KAA0101----Y4
HEX. KEY WRENCH 4MM
#5 BOLT M6*35
35
Use the correct bolts as indicated. Do not tighten any of the bolts until the lounge is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
Note:
The labeled arrow marks on the legs (#2) should
coincide with Figure 1 to ensure proper assembly.
LEG
2
2
17C17A0403001YX
SCREW ST4.2*12
STOP
DO NOT RETURN TO THE STORE!
V-3
