ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
KTS889K
PART
NO. MATERIAL CODE
PART
Q’TY
PART
NO. MATERIAL CODE
PART
Q’TY
1
2
3
4
5
6
7
1
1
1
1
6
9
8
10
2
2
1
1
1
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
PAGE 1 OF 2
V-3
COURTYARD CREATIONS INC.
!
!
!
!
!
STOP
DO NOT RETURN TO THE STORE!
FIGURE 1
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Note:
The labels marked “L” and “R” on arms (#1 and #2) should
coincide with Figure 1 to ensure proper assembly.
Step 1:
Place the right arm (#2) onto a non-abrasive surface, such
as a carpet. At the front of the chair, fasten the seat
assembly (#3) to arms (#1 and #2) by using bolts (#5).
Keep the bolts loose. See Figure 1.
KTS889K-CS01-2
KTS889K-CS01-3
KTS889K-CS11-1
62KTS889KH101
17C40A0712001YX
17C40A0705001YX
17C02A0755131YX
17KAA0101----Y4
17KAA0201----Y4
17KAC3101----Y3
LEFT ARM
RIGHT ARM
SEAT ASSEMBLY
SUPPORT
BOLT M6*35
BOLT M6*15
BOLT M6*14
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 6MM
HEX. KEY WRENCH 10MM
35
5
3
1
2
#5 BOLT M6*35
R
L
