PAGE 1 OF 2
STOP
DON’T RETURN TO STORE!
COURTYARD CREATIONS INC.
#5 BOLT M6*14
1
9
5
8
14
ATTENTION:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
STEP 1:
Open the seat/back assembly (#1) and place it on to a non-abrasive
surface, such as a carpet. See Figure 1.
NOTE:
The bolts on the seat/back assembly (#1) should be loose before
assembling the chair. See Figure 1.
STEP 2:
At the rear of the seat/back assembly (#1), fasten the seat and the
back by using bolt (#5) and washer (#8). Keep the bolts loose.
See Figure 2.
FIGURE 2
1
FIGURE 1
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
BOLT CAP M6
BOLT CAP M6
BOLT CAP
WASHER d6.5*D13*1.0
BOLT M6*35
BOLT M6*14
BOLT M6*14
SUPPORT BRACE
RIGHT LEG
LEFT LEG
17KAA0101----Y4
SEAT/BACK ASSEMBLY
18000337002
17KAA0201----Y4
18000337006
17C33A0712001Y4
17FA05040301-Y4
18000337004
17C02A0755131Y4
17C33A0722001Y4
62KTS816HQ101
KTS816H-CS03
KTS816H-CS01
KTS816H-CS02
1
1
2
2
10
2
8
13
11
12
9
10
8
7
2
6
1
1
1
1
6
5
3
4
2
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
1
KTS816H-
WM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children. Children should
always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
