KTS816C
PAGE 1 OF 2
V-3
STOP
DON’T RETURN TO STORE!
COURTYARD CREATIONS INC.
Step 2:
At the rear of the seat/back assembly (#1), fasten the seat and
the back by using bolts (#4). Keep the bolts loose.
See Figure 2.
Note:
The bolts on the seat/back assembly (#1) should be
loose before assembling the chair. See Figure 1.
Step 1:
Open the seat/back assembly (#1) and place it onto a
non-abrasive surface, such as a carpet. See Figure 1.
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
#4 BOLT M6*15
4
1
FIGURE 2
FIGURE 1
HEX.KEY WRENCH 6MM
HEX.KEY WRENCH 10MM
HEX.KEY WRENCH 4MM
BOLT M6*35
BOLT M6*14
BOLT M6*15
RIGHT LEG
LEFT LEG
SEAT/BACK ASSEMBLY
17KAA0201----Y4
17KAA0101----Y4
17C40A0712001YX
17C02A0755131YX
17C40A0705001YX
KTS816C-CS02
KTS816C-CS03
KTS816C-CS01
1
1
2
2
8
17KAC3101----Y3
1
9
7
5
6
4
1
1
1
4
3
2
1
MATERIAL CODE
PART
Q’TY
PARTS LIST
PART
NO.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children. Children
should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
1
15
