ASSEMBLY INSTRUCTIONS
KTS751G
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE!
INTENDED FOR RESIDENTIAL USE ONLY.
KTS751G-CS11-1
KTS751G-CS01-2
KTS751G-CS01-3
17KAA0101----Y4
17KAA0201----Y4
RIGHT ARM
BOLT M6*15
BOLT M6*14
HEX. KEY WRENCH 4MM
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
1
2
3
4
1
1
1
2
6
1
1
5
6
7
8
9
10
17C02A0755131YX
SEAT ASSEMBLY
LEFT ARM
HEX. KEY WRENCH 6MM
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
FIGURE 1
V-3
17C40A0705001YX
Step 1:
Place the right arm (#3) onto a non-abrasive surface,
such as a carpet. Fasten the seat assembly (#1) to
arms (#2 and #3) by using bolts (#4). Keep the bolts
loose. See Figure 1.
Note:
The labels marked “L” and “R” on arms (#2 and #3)
should coincide with Figure 1 to ensure proper
assembly.
#4 BOLT M6*15
4
2
3
L
R
1
15
17KAC3101----Y3
1
1
1
HEX. KEY WRENCH 10MM
BACK CUSHION
SEAT CUSHION
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
!
!
!
!
!
PAGE 1 OF 2
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP DO NOT RETURN TO THE STORE!
61K751GX00001BA
61K751GY00001BA