ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KTS136P
-WM
COURTYARD CREATIONS INC.
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
PAGE 1 OF 2
1
2
3
4
5
6
7
9
10
11
12
13
14
1
1
1
1
1
2
8
12
2
8
2
1
1
FIGURE 1
FRONT LEG
SEAT ASSEMBLY
LEFT LEG
RIGHT LEG
BACK ASSEMBLY
SCREW ST4.2*16
BOLT M6*16
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP
BOLT CAP M6
HEX.KEY WRENCH 4MM
NUT WRENCH 10&13MM
17C17A1306001Y4
8
2
BOLT M6*25
17C01A0709001Y4
17FA05040301-Y4
18000C23001
18000337004
18000337001
17KAA0101----Y4
17KAB1101----Y4
6
2
1
Attention:
Make sure that all bolts needed for each step matches the
corresponding figure to ensure proper assembly.
Step 1:
Place the seat assembly (#1) onto a non-abrasive surface, such as a
carpet, with the underside facing upwards. Insert the front leg (#2) into
the seat assembly (#1). Fasten them together by using screws (#6).
See Figure 1.
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #13)
- Nut Wrench (See Part #14)
17C33A0706001Y4
KTS136P-CS01
KTS136A-CS02
KTS136P-CS02
KTS136P-CS03
KTS136P-CS04
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
STOP
DON’T RETURN TO STORE!