17KAA0101----Y4
HEX.KEY WRENCH 4MM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KLS521M-
WM
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
1
1
1
2
1
2
3
4
5
8
4
8
8
1
6
7
8
9
5
7
8
5
7
1
2
8
PAGE 1 OF 2
COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
FIGURE 1
Step 1:
Place the back assembly (#2) onto a non-abrasive
surface, such as a carpet, with its holes facing upwards.
Fasten the seat assembly (#1) to the back assembly (#2)
by using bolts (#5) and washers (#7). Keep the bolts
loose. See Figure 1.
17C33A0722001Y4
17C17A0403001Y4
62KLS521DQ101
BOLT M6*14
SCREW ST4.2*12
17FA05040301-Y4
WASHER d6.5*D13*1.0
18000337004
BOLT CAP
KLS521M-CS04-6
47LA66140
KLS521M-CS04-5
LEG
SEAT ASSEMBLY
BACK ASSEMBLY
SUPPORT
You will need the following tools:
- Phillips Screwdriver (Not included)
- Hex. Key Wrench (See Part #9)
STOP
DON’T RETURN TO STORE!
