Count KF-250, Руководство пользователя

Страница: 16 / 27

16
MICRO ADJUSTING THE FOLD POSITION
It is very important to understand the relationship of the fold offset versus the crease offset.
When folding a creased stock, the nature of the creased paper when folded is to follow the
crease. If possible, adjust the crease before micro adjusting the fold.
If you wish to move the position of the fold relative to the lead edge you would need to adjust
the position of the crease and not necessarily the position of the fold. If you still feel you need
to adjust the fold press the adjust button from the run screen. You can micro adjust each fold
by pressing the arrow keys each direction. Each press will adjust by 1/10th of a mm. Each
adjustment is relative to the one before it so if you adjust fold 1 by 3 clicks it will also move fold
2 as well in the same direction. To keep the subsequent folds in their same locations you would
then need to adjust them each back the number of clicks you adjusted the previous location, in
this case 3 clicks.
REPEAT LAST JOB
Press the repeat last job button to go directly to the run screen and repeat the last job fold
settings.