GREAT BRITAIN • CUSTOMER SERVICE
tel. 0845 300 9799 e-mail [email protected] internet www.clasohlson.com/uk
1 2 3
Ver
. 20140704
Rechargeable 10 W
LED Work Light
Art.no 36-5612 Model JF8100-1A
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other queries,
please contact our Customer Services.
Safety
•
Never let children use the product without adult supervision.
Never look directly into the light; it could damage your eyesight.
•
Do not subject the product to knocks, strong vibrations or
high temperatures. High temperatures can damage the bulb.
•
Do not use the product if the safety glass, housing or stand is
damaged in any way.
•
Never cover the product.
•
Never use the product in the vicinity of explosive gases or liquids.
•
The LED bulb cannot be replaced.
•
The product must not be dismantled or modified in any way.
•
The product must only be used on the supplied stand, it must
not be mounted on a wall or ceiling.
Buttons and functions
Care and maintenance
•
The exterior of the product can be cleaned by wiping with
a damp cloth. Use only mild cleaning agents, never solvents
or corrosive chemicals.
•
If the product is not used for an extended period, the battery
should be fully charged every second month to maintain its
capacity.
Troubleshooting guide
The work light
does not come on.
The battery might be flat. Recharge
the battery.
The battery does
not charge.
•
Check that the mains adaptor/12 V
car charger is connected properly
to both the work light and electrical
socket.
•
Make sure that the cable of
the mains adaptor/12 V car charger
is undamaged.
•
Is the electrical socket that
the mains adaptor/12 V car charger
is plugged into live?
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Power
10 W
Operating time
approx. 3 hours when fully charged
Charging time
5–6 hours
Colour temperature
4000 K
Lumens
600
IP rating
IP54
Charged by
230 V AC (mains) or 12 V DC (car)
Size with handle
extended (L × W × H)
16.5 × 18 × 25 cm
Weight
985 g
Operating instructions
Charging
Plug adaption for different countries
The plug of the mains adaptor might need adapting to suit
the electrical sockets used in your country.
1. Depress the catch and detach the contact
pin plate from the body of the mains adaptor.
2. Attach the desired contact pin plate to
the mains adaptor (the knurled surface lines
up with the contact inside the adaptor).
3. Ensure that the catch snaps into place and
holds the contact pin plate on securely.
•
If the battery is already partly charged and the work light shines
the first time it is switched on, leave the work light on until
the light goes out and then recharge the battery completely.
•
If the work light does not come on when it has just been
unpacked (discharged battery), fully charge the battery before
using the work light for the first time.
•
Use only the included mains adaptor for charging
the work light.
230 V mains power
1. Connect the mains adaptor to the charge cable input socket (1)
on the work light and to an available electrical socket. The LED
indicator (2) shines red to show that the battery is being charged.
2. The LED indicator shines green once the battery is fully charged.
12 V car power
Connect the 12 V car charger cable to the charge cable input socket
(1) on the work light. The included 12 V car charger is only intended
as a temporary charger as it does not always fully charge the battery.
Note:
If the work light is charged from the 12 V socket of a car
with the engine switched off, the battery will only be charged to
about 70 % (the LED will shine red all the time).
If the work light is charged in a car with the engine running,
the charging time will be shorter and the battery will charge to
100 %, i.e. the LED indicator will change from red to green.
Switching the light on/off
1. The work light is switched on by setting the [ 50 % OFF 100 % ]
switch to either
50 %
or
100 %
.
2. The work light is switched off by setting the switch to
the middle position, marked
OFF
.
1. Charging input socket for the included charge cables
2. LED charge indicator
3. [ 50 % OFF 100 % ] 3-position switch: 50 % brightness, off,
100 % brightness
