LED Charging status
Single orange LED: Charging status 0 ‑ 33 %
Two orange LEDs: Charging status 34 % ‑ 66 %
Three orange LEDs: Charging status 67 % ‑ 99 %
Three green LEDs: Hearing instrument is
fully charged.
2. Turn Your Hearing Aids On
• Your hearing aids turn on automatically when removed from the charger
• They are programmed to have a start-up delay to allow you to insert
without whistling
• You will hear a melody during the start-up
6 Second
18 Second
3. Insert Your Hearing Aids
• Grasp receiver/dome between your thumb and forefinger
- Insert dome into your ear canal
- Gently work dome into proper position by slightly
adjusting it until it is firmly seated in your ear
• Lift the hearing aid over the top of your ear
− Adjust it to fit behind your ear
− Press slightly for a secure and comfortable fit
− Place retention strand into the bottom “bowl” of
your ear (if applicable)
1. Check the charging status of your hearing aid
4. Using Your Hearing Aids
• Your hearing aids feature Wireless Sync, which automatically adjusts both
hearing aids simultaneously to reflect changes in your hearing environment.
• The pushbutton control on your hearing aids may be programmed to give you
personal control of your hearing aids.
• The functions for short and medium press will change both hearing aids
simultaneously.
Your hearing aids may be programmed to alert you when you are making
changes to your hearing aids or when your battery needs replacing.
*Press and hold until hearing aid turns on/off
YOUR CONTROLS PRESS
Short
1 second
Medium
2 seconds
Hold*
L R
L R
L R
Volume Up
Volume Down
Program Up
TV Stream
Airplane Mode
Power On/Off
SIGNAL TONES
L R
Program Change
Volume Change
Volume Limit
Volume On Position
Low Battery
Bluetooth On/Off
Power On/Off
12 Second