BlueSTAR PnP - Class 2
Quick Start Guide
Thank you for purchasing the BlueSTAR PnP from CoSTAR Technologies. You will
soon be using your existing cell phone to communicate hands free using your
existing vehicle electronics.
Installation is easy. Simply follow the steps below, and feel free to contact us
should you have any difficulties. [email protected]
Step 1.
Connect the BlueSTAR PnP to
the HF850 junction box as shown
below. It’s best to tie wrap them
together so that they do not shake
loose.
Step 2.
Locate your onstar VIU or
VCIM. It can be located beneath the
rear seat, behind the glove box, or in
the trunk depending on your vehicle.
Step 3.
Disconnect the onstar and
connect the BlueSTAR PnP as shown.
You can tie wrap it in place or use
double sided tape either works well.
Just keep the BlueSTAR board away
from any metal where it might short
out. Replace any covers you might
have removed to access the onstar
module.
