Cosmo DC16ET, Инструкция по эксплуатации

Страница: 18 / 24

18
!
OPERATION k
1. Plug the unit into a correct mains socket. (Please
refer to the rating label at the rear of the unit.)
2. Press button ON/OFF to turn on the unit. The
compressor will start to work in continuous mode.
3. Press button HUMIDITY to set the room humidity
you need: continuous de-humidifying , 50%, 60%,
70% or 80%
4. Press the speed button to choose the ventilation
speed, high or low.
5. To turn off the unit, press button ON/OFF again.
6. The direction of the air outlet can be adjusted by
hand.
DRAINAGE
While the water tank is full, the compressor will stop
for self-protection and:
■
The sign of water full will flash.
■
The unit will buzz. * For stopping the buzz, you
may press the ON/OFF button to turn off the unit
■
The water level display will turn into red.
To move the water tank, pull it out squarely from the
unit by using the handle at the water tank.
After empting the water tank, place the water tank
into space. Make sure it is properly positioned, in
order for the 'water full' sign to go out and your
dehumidifier is operating.
Please note, in case, the water tank has not
been positioned well, the water level window
will turn into red and the unit will buzz, too.
7. OPERATION
8. DRAINAGE
To move the water
tank, pull it out
squarely from the
unit by using the
handle at the water
tank.
As the water
tank is full or has
not been positio-
ned well, the
water level win-
dow will turn into
red.