10 - removing and re-fitting the hood
The hood can removed by pulling the clips off the chassis on either side (a). Undo the zip at the
top of the hood (b). Open the hood out a little, then undo the zip on top of the metal support bar
(c). Slide the hood up until it’s clear of the handles (d).
Fitting the hood is a reversal of this procedure. Ensure the zip fits over the metal support bar (c)
and the clips fit around the screwhead under the frame (e).
11 - using the harness
A five point harness is provided to restrain your child. to fasten the harness push clips into buckle.
To unfasten push button (a) in and remove from buckle.
Sliding adjusters are fitted on the waist strap and should be carefully adjusted so the harness fits
your child comfortably. To adjust to the smallest size you will need to thread the adjusters through
the “D” ring.
The length of each strap can be changed by using adjusters (b) & (c).
To adjust the shoulder strap height locate the strap ends behind the seat (d) and pass through
slots, reposition to the desired height and pass back through relevant slot.
‘D’ rings are fitted at the end of each waist strap should you wish to attach a separate harness
complying to BS EN 13210.
12 - fitting the raincover
Unfold the raincover. Open the flaps at the back so that the raincover can fit over the handle (a).
At the front, secure the raincover to the pushchair chassis on either side with the velco strips (b).
The flap on the front of the raincover is secured by velcro tabs. The flap can be held open by
rolling it up and securing with the velcro strips at the top of the raincover (c).
13 - removing the seat cushion
Undo the harness and remove the chest pads Feed the shoulder straps (a) and crotch strap (b)
through the cushion. Move the waist straps (c) out of the way and lift the cushion away from the
pushchair.
14 - removing the basket
The basket can be removed by undoing the two poppers at the front (a) and undoing the zip (b) at
the back of the basket.
15 - removing the harness
Remove the seat cushion. At the back of the seat, pass the shoulder strap ends through slots (a).
Push the crotch strap end through the slot under the seat (b). At sides, twist the waist straps and
slide the straps through the gap in the retaining clip (c).
16 - folding the pushchair
Before folding please make sure the brake is engaged, the hood is folded flat and the backrest is
pushed to upright position.First press in the button (a) and turn the handle in the direction of the
arrow. At the same time pull the catch (b) back then push down on the handle (c). Fold the
pushchair and secure with the locking catch (d).
To unfold the pushchair unfasten the locking catch (d), lift the handle upwards until the pushchair
automatically locks into position.
It is recommend that you check the chassis is locked before continuing.
Содержание YOGA
