Cosatto the ABCS supa go 2018, Руководство пользователя

Страница: 7 / 36

4
Fitting & Operation information:
Please refer to the instruction diagrams:
Pushchair 1- Opening:
Release auto lock (1) then pull the handles upwards (2).
Press down on the locking lever (3) until a ‘Click’ is heard and the secondary
lock bar (4) is locked in place.
Check the chassis has locked in place.
Brake 2- Applying:
3- Releasing:
Front wheel
swivel lock
4- Applying:
5- Releasing:
Handle 6- Raising:
7- Lowering:
Harness 8- Opening:
9- Closing:
10- Adjusting the strap length:
Slide the strap adjustor to suitable length (1, 2 & 3).
11- Adjusting the shoulder strap position:
12- Removing:
Push the shoulder strap retainer through the backrest (1).
Push the crotch strap retainer through the seat (2).
Rotate the "C" clip to expose its opening (3) and slide the waist strap out of
clip (4).
Refitting is a reversal of this procedure.
Backrest 13- Lowering:
14- Raising:
Calf support 15- Lowering:
16- Raising:
Basket 17- Removing:
Refitting is a reversal of this procedure.
Hood 18- Fitting:
Push the brackets onto the mounts on the chassis (1).
Attach the fabric fasteners to the outside of the seat unit (2).
Fit the rear of the hood behind the backrest and attach the fabric fastener (3).
Attach the straps to the front chassis tubing (4).
19- Opening:
20- Extending:
21- Using the viewing window flap:
22- Removing:
Removal is a reversal of step
18
.
Raincover 23- Fitting:
Removal is a reversal of this procedure.
Pushchair 24- Closing:
Ensure backrest is in the upright position (Refer to step
14
).
Always remove the raincover, placing it in the basket and close the hood
completely.
Pull the ring upwards (1) then press down the secondary lock bar (2).
Push the handles forward (3) until the auto lock engages (4).
EN