Cosatto NITTY GRITTY SHUFFLE, Руководство пользователя

Страница: 3 / 35

•
Exercise caution when mounting or dismounting a kerb. Remove your child and fold the push
chair when ascending or descending stairs or escalators.
•
Ensure the folded pushchair is stored away from children so that it does not fall and cause injury.
•
Never carry a third child on your pushchair.
•
This product complies with BS EN 1888:2012.
operation
1 - list of parts
Your pushchair is supplied in one carton and contains:
1. Pushchair (basket attached) x 1
2. Front wheels x 2
3. Rear Hood x 1
2 - opening pushchair
In order to unfold your pushchair first release the folding lock (a). Next hold the pushchair firmly by
both handles and with a foot placed behind the rear wheels (b) pull the handles upwards towards
you (c). When nearly all the way up place your foot on the foot pedal (d) and continue pulling the
handles till the pushchair is fully erect.
WARNING:
Ensure that all locking devices are engaged before use.
3 - attaching the front wheels
Fit a front wheel by placing the front leg of the pushchair frame into the hole at the top of the
wheel assembly. Push down hard on the leg (a) until it clicks into place. Check that the leg is
protruding through the bottom of the wheel assembly (b) and is locked in place.
Repeat this process for the remaining front wheel.
4 - using the front wheel swivel lock
To allow the wheels to swivel, lift the locking lever as shown (a). To lock the wheels into position
push the locking lever down (b) with the wheels in any position and run the pushchair until you
hear each wheel ‘click’ as they lock in position.
5 - using the brake
To apply the brake, press either lever down firmly with your foot (a). Test the brake is engaged
correctly by trying to push the pushchair forwards for a short distance. To release the brake, raise
either of the levers (b).
NOTE:
Always apply brake before loading or unloading a child from the
pushchair.
6 - attaching the front hood
Before attaching the hood fit the elastic straps on the back of the seat around the arms of the
hood as shown (a).
To attach the front hood, insert the hood clips into the slots on the pushchair arms (b).
Holding the hood clips at a slight angle insert the front of each hood clip into the slot on the
pushchair arm, then push down and forward to secure (c).
To detach the front hood: press down on the release buttons (d) then pull the hood clips
backwards (e).
WARNING: Ensure the hood is fitted securely before use.
7 - attaching the rear hood
To attach the rear hood fix the hood clips onto the pushchair frame at the fixing point (a). Holding
the hood clips, twist them slightly so as to allow ease of attachment to the pushchair frame. Slip
the hood clips over the fixing point then push on and twist into place.
4. Front Hood x 1
5. Babynest x 1
6. Headhugger x 1
7. Footmuff x 1
8. Hinge cover x 2
9. Raincover x 1