Cosatto Bob, Инструкция по эксплуатации

Страница: 10 / 19

8 attaching the raincover
Fit the raincover by placing the shaped top of the raincover over the front of the hood and
secure in position by attaching with the press studs on both sides
(
P
) . Secure the bottom of the
raincover to the front legs with the straps (
Q
) .
9 attaching the mosquito net
A mosquito net has been provided to help protect your child from insect bites. To attach the
mosquito net fasten the press studs on both sides
(
R
) . Secure the bottom of the mosquito net
to the front legs with the straps (
S
) .
If the raincover is required you can fasten this to the back of the mosquito net press studs (
R
)
on the hood, and then by fastening the press studs at the base of the legs (
S
) .
10 fi tting the bottle holder
The bottle holder can be fi tted to either side by fastening the Velcro
®
straps around the frame,
ensuring the top strap is around the handle, above the bracket.
11 adjusting the calf support
To lower, with the stroller facing you, hold both levers under the calf support, pull up whilst
pressing locks with index fi ngers, then push down to desired position.
To raise, just pull the calf support upward and it will automatically lock into place.
12 using the swivel wheels
To allow the wheels to swivel, push down on the locking lever as shown. To lock the wheels into
position lift the locking lever up with the wheels in any position and run the pushchair until you
hear each wheel ‘click’ as they lock in position.
13 removing your basket
Your shopping basket is removable for easier cleaning. To remove your shopping basket,
undo the four straps, two found either side
(
T
) . To re-fi t your shopping basket, simply reverse
the above process ensuring the two front straps are fastened around the seat support bars.
Maximum load 3kg (6lb) of goods, evenly distributed.
14 using the backrest
The back-rest can be adjusted in different positions. To lower the back-rest, loosen the strap by
pressing the clips
(
U
) at the back of the seat unit. To raise the back rest, pull and tighten the straps
(
V
) at the back of the seat unit.
15 how to fold your pushchair
Before folding always remove the raincover placing it in the basket and fold the hood completely
back, remembering to lift the two side arms attached
(
N
) . To fold your pushchair, squeeze the
trigger (
W
) on the primary lock (
X
) . With the trigger still depressed lift upwards. Release secondary
lock (
Y
) as shown by pushing down with your foot. Push the handles forward, until the pushchair
is folded in half and the locking catch is activated. Always lock the pushchair whilst in the folded
position. There is a carry handle, which can be found on the side of your pushchair, for transportation.
WARNING: Ensure that all locking devices are engaged before use.