Cosatto ABCs wow xl, Инструкция по эксплуатации

Страница: 7 / 72

4
Fitting & operation information:
Please refer to the instruction diagrams (P. 51 - 62):
Chassis 1- Opening:
Release the autolock (a) and lift the handle upwards until the chassis locks into
position (b).
Check the chassis has locked in place.
2- Adjusting handle position:
Front wheel 3- Fitting:
4- Removing:
Rear wheel 5- Fitting:
6- Removing:
Brake 7- Applying:
8- Releasing:
Front wheel swivel
lock
9- Applying:
10- Releasing:
Basket 11- Accessing rear compartment:
Chassis 12- Closing:
NOTE:
The chassis cannot be closed in pram mode or car seat mode.
To close with seat unit fitted, the seat unit must be forward facing and in the most
upright recline position.
While pressing the primary release button (a), pull both secondary levers (b) back.
Press down on the handle (c) until the autolock retains the chassis in the folded
position (d).
Adjust the handle to the lowest position (See Step 2) for the most compact fold.
NOTE: To avoid damage in transit, the rear adaptors and front adaptors should be
removed prior to folding.
Middle adaptor 13- Fitting:
Carrycot Preparation:
14-
Remove mattress and liner from carrycot (a).
Unfold both frame bars until they locked into positions (b).
15-
Refit the liner into the carrycot (a) and secure the zip fasteners (b).
Refit the mattress over the liner in the carrycot (c).
Push the “D” rings through the slots in the liner (d).
Carrycot hood 16- Opening:
17- Closing:
Hood pocket (Style
may vary)
18- Opening:
19- Closing:
Viewing Windows 20- Opening:
(Style may vary) 21- Closing:
Carrycot 22- Note: When use in single mode, the carrycot can only be fitted rearward facing as
shown in illustration.
23- Fitting:
Dots are marked on the chassis mounts and carrycot mounts (a). These should be
on the same side and aligned if fitted correctly.
EN