Assembling the Unit
Installing the Unit
1. Installing the Electric Brush and Electrical Extensio Tube
When connecting, please hold the electric brush with
your left hand in the direction shown in the right figure.
Insert the installation hole under the electrical extension
tube component vertically into the electric brush
connector and align the conducting needles until the
"click" sound is heard.
2. Installing the Main Unit and Electrical Extension Tube
Align the electric needle of the electrical extension tube
with the suction nozzle adapter and push upward
forcefully until the "click" locking sound is heard.
Assembling the Unit
Installing the Accessories
IIn order to use conveniently, this product is equipped with a variety of accessories. You can connect
them to the product directly as needed.
1. Connecting main unit to power brush
Please align the circular adapter of the brush with the dust cup suction inlet of the main unit and
insert it into the stop position in the direction shown in Figure 1.
2. Connecting wall mount to main unit
Slip the main unit into the wall mount until it is secure.
6
7
1
2
