Description:
Manual L4 ES HP; L4 ES HP W
Document Number:
1004289
Created By:
MSHN
Revision Approval Date:
2019-06-28
Revision:
A
© Corroventa Avfuktning AB
34 (42)
4.
Open the network menu as shown below using the right arrow button on the selected master
machine.
(If the menu is not found, the Basic menu system has been activated on the machine. Change
this by opening the setup and maintenance menus and set the menu system to Advanced.)
5.
Press <Create> in the network menu and wait whilst the machine establishes the network.
6.
Once the network has been created, the display switches between the different slaves at the
top of the screen. If SuperVision has been connected, the text SuperVision appears at the
bottom of the screen. It can take up to one minute for the text to appear.
When the above steps have been followed, all slave machines are controlled by the master. This means
that all slave machines start and stop together with the master. They work with the same settings as
they had before being connected in the network. If the settings need changing, press Change and then
select the slave to be changed via the master. It is also possible to make the necessary changes on the
machine itself. Whilst the slave machine is being changed, via the master, the slave machine's
background lighting flashes so that the user can see which machine is selected.
Maintenance and service
Service reminder
The machine is set to remind you about a service once a year. The reminder is given in the form of an
alarm, but does not affect the operation of the machine. The service reminder function is reset in the
setup and maintenance menus
.
