HomeVision® Pro
© Corroventa Avfuktning AB
2021.02
27 (44)
Diagnostics
–
Test of radio connection
In the status view, normal view, first press
<Setup>
and then <
▼
> to get to the Service/System view.
In the Service/System view press
<Select>
to mark
the first row. Press <
▼
> to scroll down to
Diagnostics. Press
<OK>
to select this function.
Select the unit to diagnose. If only one unit is
connected, it is already marked, Press
<OK>
.
Press
<Select>
and then select ”Radio connection
test”, which is already marked, by pressing <OK>.
The radio connection test has now started and, as
the counter shows, runs for a maximum of 10
minutes if the user does not cancel it. The aim of this
test is for the user, for example, to evaluate a
proposed location of the control panel by
establishing whether the radio connection works
there.
Remember that the system shows the signal quality,
a statistical measurement of the proportion of
messages that are sent between the units that get
through without having to be resent. This means that
changes, both up and down, are slightly delayed and
thus slower. Do not compare with the signal strength
that is shown on a mobile phone, a measurement
value that can fluctuate rapidly.
