Place the Main Basin (F) upside down on a clean surface.
Secure the 2 Legs (I) by inserting 3 of the Hex Bolts (E) through each leg and into the cooler at each end of the
cooler.
Secure the 2 Legs (J) by inserting 3 of the Hex Bolts (E) through each leg and into the cooler at each end of the
cooler.
Turn the cooler over and keep it in place by locking the brakes on the wheels.
Secure the Handles (D) on each side of the cooler by inserting 6 of Hex Screws (E) per handle with the Hex Wrench
(K).
Secure the Bottle Opener (G) to the Cooler Body (F) by screwing 2 of the Hex Screws (E) with the Hex Wrench (K)
into the pre-drilled holes of the Cooler Body (F).
Screw 2 bolts (E) to the front side of the Cooler Body (F) underneath the bottle opener. Slide the Bucket (H) down
over the 2 bolts (E) attached to the Cooler Body (F).
Unscrew the Lid Knobs (A) from under the Lid (B) with a #2 Phillips Screwdriver and secure them on top of the Lid
(B) by re-using the 2 Bolts (C).
Clean the inside of the cooler with a soft dry towel and place the Cooler Lid (B) on the Cooler Body (F).
1.
Assembly Instructions
2.
3.
4.
5.
6.
7.
8.
9.
Tools Required:
#2 Philips Screwdriver
A
B
C
E
E
K
D
D
E
E
E
F
G
H
I
J
E
PARTS & HARDWARE LIST
Lid Knob
Lid
Handle
Cooler Body (with drain plug)
Bottle Opener
Bucket
Leg & Caster Without Lock
Leg & Caster With Lock
Hex Wrench
A
B
C
D
E
F
G
H
I
J
L
x 1
x 1
x 1
x 2
x 2
x 1
x 2
x 1
x 2
x 2
x 24
M6 x 13 Bolt
M4 x 30 Bolt
MC 47900
60qt. Galvanized Metal Corona Cooler
