corob D600 extra, Руководство пользователя

Страница: 16 / 50

SAFETY
- 16 -
COROB™ D600 - D700 - D800TX
• Do not use multisockets to connect other equipment to the same socket that powers the machine. Make
sure that the power supply of the equipment connected to the machine via serial port, like the computer, is
equipotential (which has a single access point to earth) because potential differences cause interferences
and/or damage to the serial ports.
• Periodically check the condition of the power supply cable; if it is damaged, replace it with a new cable
supplied by the manufacturer.
3.2 Warnings on the use of colorants
DANGER
The machine is suitable for use with tinting products in general. Scrupulously follow the instructions for use
given on the colorant package and carefully read the MATERIAL SAFETY DATA SHEETS (MSDS) that the
dealer or manufacturer of the product is required to provide.
Observe all of the safety instructions provided. When compulsory, wear the specified personal protective
equipment.
Below are some of the most common warnings and safety precautions provided by colorant manufacturers.
1. Harmful if swallowed.
2. Avoid eye and skin contact. In case of eye and skin contact, rinse with plenty of water.
3. Keep out of the reach of children.
4.
When compulsory, wear the specified personal protective equipment.
5. In case of accidental product leaks or spills, thoroughly ventilate the area and proceed as indicated in this
manual and in the instructions provided with the product itself.
6. Do not dispose of colorant in the sewage system. Follow local regulations when disposing of waste.