CSE-4000TS 1 Rev. 6/18/03
• Operating Manual
• Warning Information
• Parts List
CSE-4000TS
4000 Lb.
Tripod Stand
THIS OPERATING
MANUAL CONTAINS
IMPORTANT SAFETY
INFORMATION.
READ CAREFULLY
AND UNDERSTAND
ALL INFORMATION
BEFORE OPERATING
THIS TOOL.
SAVE THIS MANUAL
FOR FUTURE USE.
THIS UNIT IS AN ACCESSORY STAND
ONLY AND IS NOT DESIGNED OR
INTENDED TO SUPPORT VEHICLES.
DO NOT OVERLOAD STAND. OVER-
LOADING CAN CAUSE DAMAGE TO, OR
FAILURE OF, THE STAND.
PLACE LOAD IN THE CENTER OF THE
SADDLE ONLY. LOADED STAND MUST BE
STABLE BEFORE PROCEEDING WITH
WORK.
A VISUAL INSPECTION SHOULD BE
MADE BEFORE EACH USE OF THE
STAND, CHECKING FOR CRACKED,
DAMAGED, LOOSE OR MISSING PARTS.
USE STANDS ON HARD LEVEL SURFACE
CAPABLE OF SUSTAINING THE LOAD.
USE ON OTHER THAN HARD LEVEL
SURFACES MAY RESULT IN POSSIBLE
LOSS OF LOAD.
NO ALTERATIONS TO THE STAND SHALL
BE MADE.
READ, STUDY AND UNDERSTAND THE
INSTRUCTION MANUAL PACKED WITH
THIS STAND BEFORE USING STAND.
FAILURE TO HEED THESE WARNINGS
MAY RESULT IN LOSS OF LOAD,
DAMAGE TO STAND, AND/OR FAILURE
RESULTING IN PROPERTY DAMAGE,
PERSONAL OR FATAL INJURY.
Meets or exceeds ASME PALD-1997
standards for performance & safety.
