22
4.4.2 Print surface
Select the surface you wish to dispense droplets on. The Corning® Matribot® Bioprinter can dispense droplets on a variety of surfaces,
including Petri dishes and well plates. Choose the surface you are using and indicate the surface size. Besides dispensing single droplets,
the Corning Matribot Bioprinter can dispense droplet arrays.
1. Select the type of surface.
2. For well plates, select the vendor of the well plate.
3. For well plates, select the number of wells.
4. If selecting a well plate, individual wells can be selected by left-clicking on the desired wells. Ctrl-clicking allows for multiple individual
wells to be selected.
5. Activate the droplet array feature.
6. Select the pattern for the droplet array feature.
7. If the droplet array feature is activated, individual droplets can be selected by left clicking on the desired droplets. Ctrl-clicking allows
for multiple individual droplets to be selected.
1
2
3
4
5
6
7
