21
Prior to printing, it is recommended to prime the nozzle. This can be done through the Extrusion button on the Printer model screen
or through the Extrude Volume function in the Prepare Bioprint section of the LCD interface on the bioprinter. Press Start to start the
bioprinting process.
You can pause printing at any point. After pausing, you can resume or cancel printing.
1. Progress indicator: Displays progress of the bioprinting process as a percentage (%). This is calculated by considering the total number
of layers to be printed and the layer which is being currently printed.
2. Pause or resume: Tap to pause the bioprinting process. When the process is paused, tap to resume the bioprinting process.
3. Stop: Tap to stop the bioprinting process. You can restart a print over again after pressing Stop to cancel it.
3
2
1
4.4 Biodispensing droplets
4.4.1 Start a Droplet project
Choose the Droplet option to start a new droplet dispensing process.
