Cornell CIC-EM2011, Руководство пользователя

Страница: 3 / 4

5
SETTING UP INDUCTION COOKER
CONTROL PANEL DISPLAY
1. Check the device for visible damages.
2. Place the device on a stable and level surface.
3. Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
4. Do not block the ventilation slots of the device. This may overheat the Induction Cooker. Keep a
minimum distance of 5 to 10cm from the walls or other items.
5. Do not place the device next to open fires, heater or other sources of heat.
6. Make sure that the power cable is not bent, damaged or squashed beneath the device and does
not come into contact with sharp edges and /or hot surface.
7. The device should be connected to a rolled-out extension cable with a maximum length of 3m and
a cross section of 2mm. If an intermediate switch is used, it must be rated at a minimum of 16A.
8. Only magnetic steel or metal-based pots and pans with a flat bottom and with diameter of 12cm
to 26cm can be used with the Induction Cooker.
• The Plus and Minus buttons are for the adjustment of heating levels and also for time setting in the
Preset Timer / Timer function.
The Preset Timer / Timer function works selectively for all cooking functions
(*refer to
Operation Instruction for further information)
. Use Preset Timer to start cooking at a specific
time. Use Timer to stop cooking at a specific time. Press the Preset Timer / Timer button
and use the Plus and Minus buttons to set the preferred time. Press and hold the
buttons to decrease/increase the time rapidly. After selecting a preferred time, wait for
several seconds for activation.
While cooking, pressing the Pause button stops the heating. Press the Pause button
again to resume.
4
PARTS INDENTIFICATION
1. Thank you for your purchase of this Induction Cooker. Read all instructions carefully. Keep this User
Manual for future reference.
2. The Induction Cooker must not be left unattended while it is operating.
3. Always unplug the Induction Cooker from the power supply before cleaning or when not in use.
4. If it is a detachable power cord, always attach the power cord to the Induction Cooker BEFORE
plugging it into the power supply. To disconnect the Induction Cooker, switch it off first before
removing the power plug from the power supply.
5. Close supervision is necessary when operating the Induction Cooker near children. Ensure that the
power cord does not hang over the work surface.
6. Do not use this Induction Cooker for other than its intended use.
7. Do not operate the Induction Cooker with a damaged power cord set or plug. Any repairs should
always be undertaken by an authorized service centre.
8. Always place the Induction Cooker on a flat sturdy surface. When moving it, always ensure not to
touch hot surfaces to avoid possible spillage of hot liquids it may contain.
9. Do not immerse the Induction Cooker or its electrical parts into water or any other liquids.
10.Use of accessories or equipment not recommended by the manufacturer may result in damages
or malfunction on the Induction Cooker or injuries to the user.
11.This Induction Cooker should not be used by people who are physically or mentally impaired
(including children) unless proper guidance is provided during operation.
SAFETY PRECAUTIONS
While the Induction Cooker is running, pressing this button will reveal the power
consumption (in kW/h) on the LED display.