Cornelius P/N 3626 Скачать руководство пользователя страница 1

Страница: 1 / 4

P/N 185211007

8/25/94

IMI CORNELIUS INC.

One Cornelius Place

Anoka MN 55303–6234

Telephone (800) 238–3600

Facsimile (612) 422–3246

UNIVERSAL 750 ICE BANK CONTROL

KIT P/N 3626

Step One

A. Remove the product lines and white washers.

Clip all poly ties.

B. Unscrew the control box. Disconnect the cord

and agitator motor electrical leads. Lay the
control box over the side of the unit.

C. Remove the agitator motor. Unscrew the hex

nuts and screws holding the plate down. Re-
move the plate.

D. Disconnect the tubes to the valves. Raise the

basket and remove the ice bank control holder
by bending the top brackets.

Содержание P/N 3626

Страница 1: ...he product lines and white washers Clip all poly ties B Unscrew the control box Disconnect the cord and agitator motor electrical leads Lay the control box over the side of the unit C Remove the agita...

Страница 2: ...A Snap the new ice bank control bulb holder P N 3529 onto the second and third coil from the top B Place the ice bank control bulb into the holder and secure it with two poly ties P N 040056 000 Repla...

Страница 3: ...s being pushed up into the motor adjust the slinger to 1 16I clearance from the motor base S Apply heat sink compound P N 000113 734 between the brackets G heat sink plates and the agitator motor and...

Страница 4: ...bank control in place S Route the agitator motor electrical leads and the electrical cord through the snap bushing S Connect all wiring as shown S When connecting ground leads be sure to attach power...