Cornelius Jetspray JT20, Руководство пользователя

Страница: 10 / 18

JetSpray Owner’s Manual
Publication Number: 621058565INS - 6 - © 2014, Cornelius Inc.
Figure 2.
4. Install bowl spout gasket.
5. Lock pump housing in bowl by pushing housing straight into bowl location until it snaps into position.
Press down on top of the impeller section to assure it is down all the way into well section (see Fig. 3).
Figure 3.
NOTE: If a bowl circulator kit is used in place of the pump housing assembly, see Changing the Bowl
in Page 10 for assembly.
6. Lock spray tube in by pushing down in opening, then rotate clockwise. Correctly installed, tube will face
front of bowl (see Fig. 4).
Figure 4.
7. Slide bowl over the cooling tubes and assemble the bowl to the dispenser. Be careful not to wrinkle gasket
as it will result in beverage leaking out of bowl (see Fig. 5).
Bowl Spout
Gasket
Press until the gasket
is completely sealed