Icemaker & Adaptor Hold-Down Kit Installation Instructions
© 2008, IMI Cornelius Inc.
- 1 -
Publication Number: 629096853INS
INSTALLATION INSTRUCTIONS
I
CEMAKER
AND
A
DAPTER
H
OLD
-D
OWN
K
IT
P/N 629096853
F
OR
F
LAVOR
F
USION
/ IDC
UNITS
O
NLY
Instructions for Non-30 Inch Wide Icemaker – Flavor Fusion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Instructions for 30 Inch Wide Icemakers – Flavor Fusion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Instructions for Non-30 Inch Wide Icemaker – IDC Series Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Instructions for 30 Inch Wide Icemaker – IDC Series Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Parts Included in the Kit are Shown in Table 1:
Tools Needed:
• Power Drill
• 9/64 in. (.140 in.) Drill Bit
• #2 Phillips Head Screwdriver
I
NSTRUCTIONS
FOR
N
ON
-30 I
NCH
W
IDE
I
CEMAKER
– F
LAVOR
F
USION
U
NITS
WARNING:
Failure to follow the installation instructions correctly may result in equipment damage
and/or personal injury.
The Parts shown in Table 2 are NOT Used for this Installation:
1.
Remove the two top black side panel screws from both sides of the Flavor Fusion unit (See Figure 1) and
save the screws.
Table 1
Part No.
Description
Qty.
22127
Icemaker Rear Mounting Plate
2
50904
Silicone sealant
1 tube
620053922
Left Side Adapter Hold-Down Bracket
1
620053923
Right Side Adapter Hold-Down Bracket
1
620518916
Adaptor/Icemaker Side Hold-Down Plate (Flat)
2
620701601
#10-16 S.S. Sheetmetal Screws
12
Table 2
Part No.
Description
Qty.
620518916
Adaptor/Icemaker Side Hold-Down Plate (Flat)
2
Release Date: June 30, 2008
www.cornelius.com
Revision: 1
