Cornelius CHD22, Инструкция по установке и обслуживанию

Страница: 10 / 21

CHD22/CHD30 Installation - Plumbing
Page 8
Drain:
All models of the dispenser have a 3/4" FPT drain fitting at the bottom of the back panel.
Connect 3/4" rigid tubing to this connection, a vent is recommended for most installations.
Route the drain tubing to the building drain.
Note: Drain fitting material is plastic. If using copper, sweat the copper tube to copper
fitting together before installing on the dispenser.
Note: Keep PVC solvent away from all plastic parts of the dispenser.
Follow all applicable plumbing codes.
Because the drain tubing will be very cold, insulation is recommenced for the tubing.
Follow All Local, State and National Codes
Caution: Do not use a
condensate pump in place of
a floor drain.