
Handling the Unit Prior to Installation
Cornelius Deutschland GmbH
Document no. TD1002000
Version 01/10/2019, Index 2
Operator manual Undercounter cooler
Energize 2-5 HC
12
ATTENTION!
Component damage due to material ageing!
Material can age due to long storage periods, thereby affecting the materi-
al’s properties (e.g. plastics and seals may become brittle). The properties
of lubricants may change due to long storage periods.
•
Check the assemblies and components for damage before each use/
before installing them. Do not install assemblies or components that
show visible signs of ageing.
ATTENTION!
Component damage due to freezing liquids!
Ambient temperatures that are below freezing will lead to the freezing of
any water or cleaning agent residue remaining inside the unit. This will lead
to damage to internal components.
•
Before shipment, storage or relocation of the unit, the unit is to be
cleaned and the cleaning solution is to be fully drained from the unit.
2.3
Disposal
Disposal of the units must be carried out in compliance with the applicable local and/or national
and international regulations. Units must not be disposed of with household waste.
If the unit contains fuels or lubricants in liquid, paste-like or gaseous form, such as oil, grease,
cooling agents etc., such fuels or lubricants are to be collected using appropriate measures
and disposed of in compliance with the applicable local and/or national and international reg-
ulations. Such fuels or lubricants must always be prevented from seeping into the ground, the
sewage system and any bodies of water, and must always be prevented from entering the at-
mosphere.