Cormach MEC 200 TRUCK, Руководство по эксплуатации и обслуживанию

Страница: 21 / 44

Use and Maintenance Manual – 09/2016 Rel. 0 Page 15
13.1 Keyboard
In this manual, the keys are numbered for convenience from [P1] to [P10] as shown in picture F13.1. Beside the key reference
numbers the key symbols (for an easy-to-read) are shown. The ten buttons have a main function indicated by a symbol in the big
circle and a secondary function indicated by the symbol in the small circle located along side. Some of the secondary functions feature
a led to indicate their activation. The keys [P7] , [P8] Start and [P10] Stop do not have a secondary
functions. The secondary function of the keys is identified in this manual with the codes from [F+P1] to [F+P9] as shown in picture
F13.3.
Figure F13.2: Key sample showing the main and secondary function
To enter the secondary function of the keys press the key [P7] then, by holding down, press one of the keys for the
secondary function you want, then release both keys.
Figure F13.3: Numbering of the secondary function of the keys
Table T13.2: Settings, programs and menu available in the SERVICE mode
SERVICE mode
Key Setting/Program or Menu Key Setting/Program or Menu
[P1] Not used [F+P1] Not used
[P2] Not used [F+P2] Select weight material in Fe/Zn or Pb
[P3] Machine calibration [F+P3] Exit SERVICE mode (return to the NORMAL mode)
[P4] Grams/ounces selection [F+P4] Read counter with the number of spins
[P5] Inches/mm selection [F+P5] Parameters MENU
(Menu with password reserved for technical service)
[P6] Select the imbalance threshold view [F+P6] Not used
[P9] Not used [F+P9] Test programs MENU
Main function of the key.
This is the key to be press.
Secondary function of the key.
It is only a graphic illustration. A led light
on means the secondary function is
enabled.
[F+P1]
[F+P4] [F+P5]
[F+P6] [F+P9]
[F+P2] [F+P3]