104
For Windows NT, 2000, and XP
Corinex Wireless to Powerline AP
This example shows the IP address of your Wireless adapter as 10.101.2.38.
Your computer may show something different.
7.2 For Windows NT, 2000 and XP
The following steps show an alternative way of obtaining the MAC and IP
address for your wireless, Ethernet or USB adapter.
1. Click
Start
and
Run
. In the
Open
field, enter
cmd
. Press
Enter
key
or click the
OK
button.
Fig. 7.2 Running ipconfig
2. In the command prompt, enter
ipconfig /all
. Then press
Enter
key.
3. Write down the
Physical Address
as shown on your computer
screen (Figure 7.2); it is the MAC address for your wireless, Ethernet
or USB adapter. This will appear as a series of letters and numbers.
The MAC Address/Physical Address is what you will use for MAC
Address Cloning or MAC Filtering.
The example in Figure 7.2 shows the IP address of your Wireless adapter as
192.168.1.10. Your computer might show something different.
Note:
The MAC address is also called Physical Address.
When entering the information using the Access Point’s web-based utility,
type the 12-digit MAC address in this format, XX:XX:XX:XX:XX:XX without
the hyphens for MAC Filtering.
When entering information for MAC Address Cloning, type the 12-digit
MAC address.