Corinex Standard Repeater I & II
CXP-UFSGX-I | CXP-UFSGX-II
10
Step 4:
Place the union nut on the contact carrier and tighten it until it stops.
Figure 8: QUICKON connector - step 4
Step 5:
You will feel the wires engage when they have reached the optimum screw-on
width. The QUICKON nut is now screwed on so tight that it cannot be unscrewed again
by hand.
Figure 9: QUICKON connector - step 5
Now you can connect the power cable to QUICKON male connector provided in gateway.
Look for the ‘arrow’ mark on the cable, which indicates where it should be inserted. See the
figure 10 below:
Figure 10: Making connector connection
Return to Table of Contents
