Corghi Artiglio Master 26 MI, Руководство оператора

Страница: 44 / 212

44
Artiglio Master
operator’s manual
INSTALLATION CLEARANCES
WARNING
The installation site must be chosen in strict observance of local regulations regarding
safety in the workplace.
IMPORTANT: for correct, safe use of the machine, users must ensure a lighting level
of at least 300 lux in the place of use.
ATTENTION
If the machine is installed outdoors, it must be protected by a roof.
Place the tyre changer in the chosen work position, complying with the minimum clea-
rances shown in fig 4.
The machine must be placed on a horizontal surface, preferably concrete or tiled. Do not
install on loose or uneven surfaces.
The surface on which the machine is installed must withstand the loads transmitted during
operation. The surface must have a load-carrying capacity of at least 500 kg/m2.
Ambient conditions for operation
- Relative humidity 30% - 95% without condensation.
- Temperature 0°C ÷ 50°C.
WARNING
The machine must not be operated in a potentially explosive atmosphere.
ELECTRICAL AND PNEUMATIC HOOK-UPS
WARNING
All operations required for electrical hook-up of the machine must be carried out
exclusively by a qualified electrician.
- The electricity supply must be suitably rated in relation to:
• the machine’s electrical power absorption, specified on the machine’s dataplate - 23 fig.
8a;
• the distance between the machine and the power supply hook-up point, so that vol-
tage drops under full load do not exceed 4% (10% during start-up) below the rated
voltage specified on the dataplate.
- The user must:
• fit a power plug in compliance with the relevant safety standards on the power supply
lead;
• connect the machine to its own electrical connection - A fig. 5a - having a specific
circuit-breaker (residual current set to 30 mA);