USE
8
1 Programme Chart
This will help you to select the correct
programme for drying.
2 Low Temperature Button
Press this button to reduce the temperature when
drying particularly delicate items.
To be used only when drying synthetics with
the time controlled programme.
3 Buzzer Off Button
Press this button if you do not wish the buzzer to
ring during the «anti-crease» phase.
4 Start Button
Press this button for a few seconds to start the
selected drying programme.
If the door is opened during drying, this button
has to be depressed after closing the door to
allow the programme to continue.
5 Drying Light
This light (green) indicates that the machine is
performing the drying programme.
6 Cooling phase Light
This light (green) will illuminate when the cooling
phase is in operation. This starts 9 minutes
before the end of drying to prevent any creasing
or crumpling of fabrics.
7 End of Programme Light
This light (red) comes on
at the end of the
drying programme
and remains alight until the
door is opened.
This light will also remind you that the filter
should be cleaned at the end of each drying
cycle.
8 Open Door Light
This light (red) flashes when the door is opened
or not well closed.
9 Mains-On Light
This lights up by selecting the programme or time
and goes out when the programme selector dial
is turned to «0».
10 Programme Selector Dial
To set the machine to the selected programme or
time, turn the dial until the
letter
or the
time
you
want coincides exactly with the pointer.
Control panel
ALGODON Y LINO
EXTRA SECO
SECO PARA GUARDAR
SECO PARA PLANCHAR
SINTETICOS
SECO PARA GUARDAR
SELECCION DEL TIEMPO 20-90 MIN.
D
A
B
C
SELECTOR PROGRAMAS/
INTERRUPTOR MARCHA/PARADA
PROGRAMAS
MARCHA
BOTON REDUCCION TEMPERATURA
BOTON DE EXCLUSION ALARMA
BOTON START
LUZ PILOTO DE SECADO
LUZ PILOTO DE ENFRIAMIENTO
LUZ PILOTO FIN DE PROGRAMA
LUZ PILOTO PUERTA ABIERTA
1
2 3
4 5
67 8 9
10
