CopperSmith, Remote Blower Installation Instructions (All Models), Revised 09-18-16
Page 1
Models:
CSRB-6
CSRB-8
CSRB-10
CONTENTS:
Part 1 - Planning The Installation
Part 2 - Securing The Blower / Ventilator
Part 3 - Electrical Connection
READ AND SAVE THESE INSTRUCTIONS
Installer:
Please leave these installation instructions with the range hood installation instructions.
Please leave these installation instructions for local electrical inspector’s use and for future reference.
Owner:
WARNINGS:
Must be followed carefully to avoid personal injury.
IMPORTANT:
Must be followed carefully to avoid damage.
TIPS:
Contain helpful information to facilitate installation.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
OBSERVE THE FOLLOWING:
Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manu-
facturer.
Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such as a tag to the service panel.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes
and standards, including fire-rated construction.
INSTALLATION INSTRUCTIONS
CopperSmith Remote Blower / Ventilators
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
