Instructions for Exeter Dining Buffet
Tools required
Hardware included:
1
Figure 2
.
Re-locate the slide
Unpack the buffet onto a
soft level surface and
identify the listed items.
Exeter Dining Buffet:
6-EXE-50-04
4mm Allen wrench (1)
Allen wrench
72 ½” x 19 ” x 33 ½”H
mounting block
Figure 1
.
Release the drawer slides
W
hen
in use
How to adjust the height of the drawer tray
Front slide clips
Press the
handle
To remove drawer trays from the
slides, reach under the drawer box,
press both handles on the front slide
clips on the drawer bottom and firmly
pull drawer forward (
Figure 1
).
Release the drawer slides
The position of drawer tray can
be adjusted with just a few steps:
Using
the
provided
Allen
wrench
detach the
¼” - #20 x 35mm Allen
bolts from the
slide mounting block
on
both sides (
Figure 2
), then move the
slide mounting blocks
to the level
where the drawer tray is going to be
placed. Fasten the relocated
slide
mounting blocks
with
¼” - #20 x 35mm
Allen bolts by aligning the holes on the
mounting block
with the pre-drilled
holes on the case sides and middle.
Uninstall the slide mounting block
¼” - #20 x 35mm
Allen bolts
Slide Mounting Block
7
8
