Assembly Instructions for Moduluxe Plinth Beds
Headboard
Instructions for the bed types
pictured below. Please identify the
following items.
Hardware included:
35mm
– 4mm bolt (Q 26 / K 28 / CK 28)
Components included:
Headboard (1)
Stand the headboard upright and align
the holes in
plinth box ribs
with the
holes in
headboard
. Insert and loosely
tighten 2
” – 4mm bolts by using the
provided 4mm Allen wrench. Tighten all
the bolts. Level the
HDBD
(2 leveling
points) and the
plinth base
by turning
the leveling bolts underneath each
HDBD leg
and the plinth box
corner
blocks
. (
Figure 1
).
Step 1:
Attach plinth base to the
2” – 4mm bolt
Plinth box (1)
2” – 4mm bolt (Q 8 / K 10 / CK 10)
Plinth box
HDBD deck / FTBD deck
Veneer HDBD
Queen
King
Cal-King
Clapboard HDBD
Queen
King
Cal-King
Upholstery HDBD
Queen
King
Cal-King
Cal-King
4mm Allen wrench (provided)
HDBD
Leveling
point
HDBD
Leveling
point
Plinth
leveling
corner
block
Plinth
leveling
corner
block
Plinth
leveling
corner
block
Number of bolts for HDBD
Queen
King
6
8
8
Plinth box ribs
HDBD leg
HDBD leg
4mm Allen wrench (1)
headboard (HDBD)
Tools required
Allen wrench (provided)
1
Notice:
Beds must be disassembled before moving to avoid damage. Never attempt to move the bed while it is
assembled. Failure to do so would void the warranty.
Figure 1
.
Connect plinth base
with HDBD
Deck spine (1)
Plinth
leveling
corner
block