I n s t r u c t i o n s f o r S l o a n e F l o a t i n g B e d s
Tools required
Components included:
Upholstered headboard (1)
Allen wrench (provided)
Step 1:
Install
support legs
to the
Install the
support legs
by placing the
mount plate into the cut-out in the
leg
rail
(
Figure 1
). Align the four mounting
holes on the support leg mount plate
with the holes in the cut-out in the
leg
rail
. Tighten with ¼ - 20 x 20mm hex
bolts.
Hardware included:
¼ - 20 x 15mm hex bolts (16)
1
Figure 1
.
Install
the support leg
on
leg rail
Leg rail
¼ - 20 x 20mm
hex bolt
¼ - 20 x 20mm hex bolts (8)
Footboard rail (1)
Support legs (2 walnut/ash)
Platform w/ hardware (1)
¼ - 20 x 50mm hex bolts (4)
Siderails (2)
Allen wrench (1)
Cal King
74” x 92 3/4” x 48”
Platform kit (1)
“L” brackets (4)
Leg rail (1)
Siderail w/ hardware (1)
1 ¾” pan head screws (3)
8.5” support blocks (3)
Mount
plate
leg rail
Support leg
Leg rail
Please
identify the
listed items
before
installation.
Sloane Floating Bed
King
78” x 88 3/4” x 48”
Queen
62” x 88 3/4” x 48”
NOTICE:
Beds must be disassembled before moving to avoid damage.
Never attempt to move the bed while it is assembled.
Failure to do so would void the warranty.
1-SLO-02-04
1-SLO-01-04
1-SLO-05-04