In s t ru c t io n s f o r As t rid Be d s
Tools required
Please identify
the listed items
before
installation.
Components included:
Single / Split HDBD (1/2)
Allen wrench
Step 1:
attach the
base assemblies
Unpack the bed parts onto a soft, level
surface. Put the
base subassemblies
upside down on the floor, facing each
other. Attach the
support leg plate
to the
middle support rails
with
¼“ – 20 x
35mm hex bolts (
Figure 1-1
). Attach the
middle leg assembly
with ¼ - 20 x
20mm hex bolts (
Figure 1-2
) to the
support leg plate.
Hardware included:
¼ - 20 x 20mm hex bolts (4)
1
support leg assembly
¼ - 20 x 20mm
hex bolt
¼ - 20 x 35mm hex bolts(48)
HDBD deck ASM (1)
FTBD deck ASM (1)
Joining plates (2)
Allen wrench (1)
Support leg assembly(1)
Notice:
Beds must be disassembled before moving to avoid damage. Never attempt to move the bed
while it is assembled. Failure to do so would void the warranty.
King
Queen
Cal King
Astrid bed with
Split headboard
King
Queen
Cal King
Astrid bed with
Single headboard
King
Queen
Cal King
Astrid bed with-
out headboard
Figure 1-1
.
Install the support leg plate
Figure 1-2
.
Install the support leg
assembly
Support leg plate
¼ - 20 x 35mm
hex bolt
Support leg
plate
Middle support rail
Middle support
rails
Middle support
rails
Base assembly1
Base
assembly2
¼ - 20 x 50mm hex bolts(8)
Support leg plate (1)
Cross nuts (4, w/ headboard)
¼” – 20 x 80mm hex bolts (4, w/ headboard)
Base assemblies (2)