Telescopic Ladder
10447
Instructions for Use
Please read and retain these instructions for future reference
v003 17/10/17
TECHNICAL DETAILS:
3.2M TELESCOPIC LADDER
DIMENSIONS:
320x7x47cms
WEIGHT:
8.8KGS
(Net Weight)
RUNG DIMENSIONS:
W2.5cm x D4cm approx.
STANDARDS:
PLEASE NOTE THAT THIS PRODUCT CONFORMS TO EUROPEAN STANDARD EN131-6:2015
USER INSTRUCTIONS
:
ATTACH THE SUPPORT BAR SECURELY INTO RAILS BEFORE USING.
A.
INSERT SUPPORT BAR IN ROUND COUPLINGS SLOTS.
B.
INSERT BOLTS THROUGH RAILS.
C.
PLACE LOCK NUTS ON BOLTS AND TIGHTEN FULLY.
Operation for complete extension of the ladder:
1.
Undo the fabric band that is around the ladder by pulling apart the hook & loop.
2.
Ensure the ladder is on a firm, flat and level surface.
3.
Place one foot on the bottom fixed rung of the ladder.
4.
To open the ladder start by pulling up the bottom ladder rung until you hear it lock into place.
5.
Repeat step 4 for each rung in order of lowest to highest until the ladder is fully extended.
Do not try to
extend from top down as locks will not secure correctly.
6.
Once all rungs are open and securely locked into place the ladder is then safe to use.
Operation for partial extension of the ladder:
7.
Repeat steps 1 to 3 as above.
8.
To open the ladder start by pulling up the lowest rung of the ladder (the one up from the fixed rung your
foot is placed on) until you hear it lock into place.
9.
Repeat step 2 for each rung from bottom upwards (of lowest to highest) until your desired height has been
reached. Leaving any top rungs above this height closed shut.
Do not try to extend from top down as
locks will not secure correctly.
10.
Once all desired rungs are open and securely locked into place the ladder is then safe to use.
Support Bar
RED LOCKING MECHANISMS
DO NOT TOUCH THESE RED TABS
WARNING LABEL ON LADDER RUNGS
Black tabs
slide inwards
to close the
ladder.
