Cooper & Hunter DOMESTIC CH-1000 EC, Инструкция по эксплуатации

Страница: 6 / 22

www.cooperandhunter.com
6
2. Power on
When the product link the power,the red/blue power light (1) will on.
Press the power button (20), buzzer sound short voice, system is on,
(18) show the day of the week (17) instant hours, (16) instant minutes,
(15) room temperature. Degrees Celsius symbols
"
°C
"
normally on, half
power working light
"
LO
"
on, Wake Up Events default setting Auto
mode
"
A
"
on (wake up events default setting auto mode), System
default setting 35 °C.
If power suddenly off when system working, wake up again, system will
work according to last set.
3. Time calibration
When power on Press (12) and (13) at the same time 5 sec, (18) will
flashing, press (10) and (11) to choose date, after press (13) confirm the
date, (18) stop flashing, (17) start flashing, press (10) and (11) to choose
the hour, after press (13) confirm the hour, (17) stop flashing, (16) star
flashing, press (10) and (11) to choose minutes, after press (13) confirm
minutes, press (16) save the setting and exit.
4. Set temperature (Auto mode is same with mechanical mode):un it is °C
When power on press (10) and (11) can choose temperature, when
setting (15) are flashing. After finish setting 10s with no any action, system
will save automatically to save Settings and exit.
5. Set timer
5.1. The timer setting guide under the Mechanical Mode (24hours timer)
Press (19) to choose the Mechanical mode. The
"
M
"
will display in (7) area.
Press (13) to set the hour of timer to close the heater. Press (10) and (11)
to choose hour (When the hour was smaller than the current hour, the
system will be the next day automatically). Press (13) to set minute of timer
to close the heater. (when the setting hour is same with system hour, if the
minute was smaller than the current minute, the system will be the next
day automatically).
Press (12) to finish the timer setting and saving it. The system will close as
your setting time.
5.2. The timer setting guide under the Auto Mode (Weekly program timer)
Press (19) to choose the Auto Mode, the
"
A
"
will display in (8) area.
Press (13) to set the working timer of heater.
Press (10) and (11) to chose the setting date of week.
Press (13) again to set the first working timer of this day.
Press (10) and (11) to set hour to start heating, Press (13) again and use
(10) and (11) to choose the closing heating time.
Press (13) to finish the first stage. It will show the stage of time in (15)
area, it has 4 working timers of each day. Repeat the above progress to
set the working time for other stages. (When the starting time is same
with the closing time, the system will cancel this heating timer).
6. Power on & Power off
Press (20) can power on or power off, if turn off in the auto mode,
system will work as the assigned procedure, if need a long time off,
need to change the system into Mechanical mode and turn off. lf
system is in the out of the set working time, after press (20) to turn on
the product without any action in 10sec, system will turn off.
7. Part power & Full power choose
Press (2) can change the power in part & full, when full power working
(5)
"
HI
"
on, (4)
"
LO
"
off. When part power working (4)
"
LO
"
on , (5)
"
HI
"
off.
8. Mechanical mode & Auto mode
Press (19) can change the mode in Mechanical & Auto, mechanical
mode
"
M
"
on,
"
A
"
off, auto mode
"
A
"
on,
"
M
"
off.
9. Shutdown memory function
Press power button (20) turn off and turn on again ,or it’s in the not
working time and turn on ,timing / working state has power off
memory function.
10. Cut electricity restart function
The automatic restart function is automatically started when the power
is switched on after power is cut off,no need to press the button.
11. Press voice
Every time effective press, buzzer will sound once. Continuous press
only sound once.
12. Child lock
When product is working, press (10) and (11) for 3sec at same time,
system will lock, at this time (15) will show
"[ ]"
, last 5sec then back to
the room temperature, if there is any action,
"[ ]"
will show on 5sec,
buzzer will sound, then back to the room temperature, unlock way:
a) Power off
b) Get into the unwork time
c) Press (10) and (11) 3sec, system will unlock.