Cooper & Hunter CH-HP08UIMPRM, Руководство по установке, Страница: 20 / 30

19
10.8. Setup
Click the setup key to enter the setup and the interface display is shown as
follows:
① ② ③ ④
⑤ ⑥ ⑦
Key No.
Key Name Key Function
①
Return key
Click this key to return to the main interface.
②
Operating mode
Click this key to view the current operating
parameters of the unit.
③
Electric heating
Click this key to turn on the unit Electric
heating.
④
Factory parameter
Click the key and enter the password to
enter the factory parameter settings and
status parameters interface.
⑤
System time
setting
Click this key to set the system time.
⑥ Mute setting
Click this key to set the unit mute function
mode.
⑦ Curve key
Click this key to view the temperature curve.
Note:
If the unit has
②
,
⑥
or both functions, the corresponding icon will be displayed
on the setting interface.
In the setup interface:
(1)Tapping operating mode button
②
, then the interface display is shown as
follows:
(2)Tapping system time setting button
⑤
, then the interface display is shown as
follows:
Key No. Key Name Key Function
① Return key Click this key to return to the setup interface.
② Up key Click this key to increase the value.
③ Down key Click this key to decrease the value.
④
Cannel key
Click this key to cancel the current settings and return
to the settings page.
⑤ Enter key Click this key to save the current settings.
(3) Tapping Electric heating button
③
, then the interface display is shown as
follows:
②
③
④ ⑤
1