
Cleaning method for water tank:
1. Pick up the mist outlet cover and
push the fasteners at both sides to
open the mist outlet cover and
decorative ring. Detach the transfer
pipe by turning it counterclockwise
for 90 degrees. Disconnect the filter
in water tank (press and pull up the
springs at both sides of the filter). Lift
up the water tank and remove the
water cover subassembly by turning
it counterclockwise
Failure to comply with the rules of the section
“Cleaning and servicing the device” can lead to the
development of micro-organisms, bacteria inside the
pan. That will lead to unpleasant smells and violation
of hygienic norms.
Use as much as possible pure water! Water often
contains calcium salts, rust particles and other chemical
elements. Such elements are able to settle on the internal
surfaces of the device, which can lead to breakdown or
difficulties during routine maintenance of the instrument.
IMPORTANT!
Cleaning method for atomizer:
1. Inject 10ml acetum on the surface of the atomizer (add or reduce
acetum according to the scaling status) and immerse the atomizer for
2-5mins.
2. Scrub the surface of the atomizer with the cleaning brush gently
until the scale is removed.
3. Wash the surface of atomizer with clear water.
www.cooperandhunter.com
7
2. Rinse the detached components under tap water. After cleaning,
reassemble the components in reverse order. The water cover subassembly
must be installed in place.
3. Add a small amount of vinegar or 5-І 0 drops of cleaning solution into the
water tank. Then fill 1/4 of the water tank with water. Leave it for 5~10min
and then use a brush to clean the water tank.
Cleaning method for water channel:
1. Disconnect the float plate to clean. Then put it back.
2. If the water channel has water deposits, wipe it with a soft cloth damped
with a little vinegar and then rinse it with clean water.
Cleaning the fragrance box:
1. Take out the fragrance sponge and clean it with water. Then leave it to
dry.
2. Clean the fragrance box with water and then leave it to dry. Put the dry
fragrance sponge back into the box and then place back the fragrance box.